Taka Entry · F8
Loom → metres → weight → Enter
Day or night shift, taka numbers assigned for you. If the average per 100 m is more than 5% off the quality's standard, you're warned right there.
Taka · Beam on loom · Beam stock · Looms
Every loom's output, every shift, live.
Enter takas for the day or night shift from the keyboard or a phone. Weights are checked against the quality's standard, a loaded beam tells you how many takas to expect, and every loom shows its efficiency with a 30-day chart.
SFShree FabricsF7
Search anything…Ctrl K
EN
RK
Taka Entry · F8
30/10/2026
LoomTaka no.MetresWeightAvg / 100 m
L-052416117.013.3811.44 ✓
L-062417116.513.3111.43 ✓
L-072418117.013.4211.47 ✓
L-082419117.014.3012.22 ⚠
⚠ L-08: more than 5% off the standard 11.47 kg (+6.5%)
Quality std 11.47 kg / 100 m
Sunil · ₹2.40 / m +₹280.80
Weaver is optional
What you get
Production: 9 things you'll use every day.
Weaver
Picking the weaver is optional
Units that pay per metre pick the weaver; units on fixed wages can switch the column off in Settings.
Beam on loom · F9
Load a beam in one entry
Enter the taka cut and see expected takas and metres at once. Add a second beam (border / patta), plus spreader, drawing-in and dropper charges, in the same entry.
Taka Register
The full history of every taka
Loom, beam, design, weaver and grade (A / B / Fent), with filters and totals. Move a taka booked on the wrong beam to the right one.
Loom page
Efficiency and a 30-day chart
RPM × shift hours against picks actually woven — see at a glance which loom is falling behind.
Beam Stock
Beams, pipes and beam cards
Own, bought and job beams, with weight worked out. Print beam cards, and track which party got its empty pipes back.
Alerts
Beams about to finish
The dashboard lists looms whose beam is nearly done, so the next one is ready in time.
Labels
Taka labels
50×25, 50×75 or 70×30 mm labels on a roll label printer, or barcodes on A4 — taka no., quality, metres, weight.
Mobile
Entry from the shop floor
Tap a loom tile, key in metres and weight, Save. Works without internet too.
How it works
Four steps. That's it.
- 1
Set up looms and qualities once
The setup wizard adds all your looms in one go, and each quality with its reed, picks, width, yarns and standard weight.
- 2
Load the beam
Enter the beam and taka cut — Loomiro knows how many takas it should give.
- 3
Enter takas
Enter–Enter–Enter at the end of the shift, or from a phone on the floor. A wrong weight is caught on the spot.
- 4
Watch the dashboard
Today's production, the loom board and beams about to finish — on your phone too.
Press Enter, next taka. Catch a wrong weight on the spot.
See also
Bring your unit to Loomiro.
We move your data over from your old software, then show you a demo on your own unit's numbers.