Mill challan
Send the goods
Send grey takas to the mill — the challan says “job work, not a sale” (Rule 55).
Mill (RFD) · Job work in · Job work out
Off to the mill and back — shrinkage worked out.
Send grey takas to the process house and receive them with finished metres. Whether a party sends its beam and yarn, or your beam goes out to a job weaver, every metre is tracked, right up to ITC-04.
SFShree FabricsF7
Search anything…Ctrl K
EN
RK
Mill (RFD)
Mill inward · MI/26-27/57
Mill challanMill inwardJob work inJob work out
Grey1,404.0 m12 taka
Finished1,316.2 mRFD
Shrinkage6.25%normal 5.0%
Short beyond normal17.6 m · ₹1,694
Mill, quality and lot-wise report — see which mill is eating more cloth.
Challan: “job work, not a sale” (Rule 55) · ITC-04 CSV
What you get
Mill & Job Work: 7 things you'll use every day.
Mill inward
Shrinkage check
Enter finished metres and shrinkage % is checked against the quality's normal. RFD takas sell by finished metres.
Report
Which mill is eating cloth
Grey vs finished by mill, quality and lot — how many metres and how many rupees short beyond normal.
Job work in
A party's beam and weft yarn
A party's beam arrives, its weft yarn arrives, leftover yarn goes back — all in Job Party Stock.
Job work out
Outside job weavers
Send your own beam or yarn to an outside job weaver, receive the grey, bill the job charges — the yarn stays yours.
ITC-04
Job work return
The GST job work return as CSV, separately for each firm.
Mill stock
Goods lying at the mill
0–15 / 30 / 60 / 60+ days — how long each lot has been at the mill.
How it works
Four steps. That's it.
- 1
Make the challan
Pick takas, pick the mill — print the challan.
- 2
Receive
Enter goods back from the mill with finished metres.
- 3
Shrinkage, automatically
Grey vs finished against the quality's normal — with a warning if it's more.
- 4
Read the report
This month's shrinkage on the dashboard, and the full report.
The loss hiding in every month, now in a report.
See also
Bring your unit to Loomiro.
We move your data over from your old software, then show you a demo on your own unit's numbers.